Skip to content
Documentation: Release notes

Documentation · About

Release notes

What changed in each vGPU OS version.

Alpha

This documentation covers vGPU OS 0.3.0, in alpha. Screens and commands may change between versions; to see the installed version, use vgpu-os version.

0.3.0

October 2026 · Debian 13 · OSX-REIMS 0.6.0

This is the first version published after 0.1.2, and it also brings what was done in 0.2.0, which was never distributed.

  • Web panel: the VMs and the computer can now be run from the browser of another computer, phone or tablet on the network, over HTTPS, with the user name and password from installation. Tabs Virtual machines, This computer, Maintenance, Backup & Restore, Logs and diagnostics and Terminal, in Portuguese and English. The address is shown on the OSX-REIMS console. See Web panel.
  • OSX-REIMS 0.6.0, on the rewritten Reims vGPU: the VMs' GPU is now the apple-gfx-pci device, and Reims vGPU is built differently during preparation. New macOS Tahoe VMs get ReimsVgpu.kext, which makes macOS use more of the GPU. What changed in OSX-REIMS is in its release notes (opens in a new tab).
  • Backup & Restore: a whole VM becomes a single file and can be restored over itself or as a new VM, from the OSX-REIMS console or the web panel.
  • Sound in the VMs: macOS plays through vGPU OS' sound output (PipeWire), and new VMs have OpenCore's boot chime. The output and volume are chosen with vgpu-os sound, the a key in the session menu or the web panel. Computers whose Intel sound needs firmware (SOF) get that firmware in the first setup.
  • The VMs' network: each VM can have an address of its own on the network (bridge), besides NAT. The bridge is turned on once, from the console or the web panel, and needs a wired network port.
  • Monitor: the monitor's resolution and refresh rate can be chosen with vgpu-os display, the d key in the session menu or the web panel; the new mode is tried for 15 seconds and kept only if confirmed. Each VM also has its own refresh rate, which follows the monitor by default.
  • NVIDIA: from the GTX 16xx on (RTX 20, 30, 40 and 50 included), the first setup installs NVIDIA's own driver, with its open kernel modules, from NVIDIA's repository for Debian 13, together with the libcuda1 library its Vulkan needs. Older cards keep Debian's driver. Tested with a GeForce RTX 5060 and a notebook RTX 2060. Secure Boot must be off.
  • AMD: Mesa moves to version 26, from Debian 13's backports, which the rewritten Reims vGPU needs on AMD GPUs.
  • Graphics validation: says whether each GPU can run a VM and, with NVIDIA, whether the driver's library is installed.
  • Kernel 7.2, from Debian's backports, and nvtop in the image, to watch any GPU's use.
  • First setup: the OSX-REIMS preparation's summary stays on screen until you press Enter, and a preparation that did not finish is offered again.
  • Removed: each VM's GPU memory setting, which the rewritten Reims vGPU no longer has.

0.2.0

October 2026 · Debian 13 · OSX-REIMS 0.5.0

Internal version, not distributed to members. It brought the web panel, which reached everyone in 0.3.0.

0.1.2

September 2026 · Debian 13 · OSX-REIMS 0.4.1

  • OSX-REIMS updated to version 0.4.1: new VMs get the EFI with OpenCore 1.0.8, VirtualSMC 1.3.8, and AppleALC 1.9.8. Existing VMs keep their own EFI.
  • The system itself has not changed from 0.1.1.

0.1.1

September 2026 · Debian 13 · OSX-REIMS 0.4.0

  • First setup: the driver plan is shown before confirmation; validation that distinguishes a real GPU from software rendering; one automatic restart when the GPU needs to read its firmware; each GPU validated separately on computers with more than one.
  • Intel GPUs: fix for integrated graphics firmware (tested with UHD 770).
  • Hardware: hardware information is updated on every boot, so moving the monitor to another GPU takes effect from the next boot.
  • Startup: loading screen with vGPU OS branding; hidden boot menu, with a rescue console and automatic return after a failed boot; boot no longer waits for the network on cards with multiple ports.
  • Session: restart and shut down the computer from the session menu; Ctrl+Alt+F2 opens a text login screen.
  • Installer: ERASE confirmation accepts uppercase and lowercase.
  • Access: SSH enabled by default; the user is now called vgpu-user; administration tools included (vim, htop, atop, nmon, iperf).
  • Security: fixed permissions on system files.
  • OSX-REIMS 0.4.0: GPU and video memory selection per VM, and rebuilding Reims vGPU from scratch.

0.1.0

September 2026 · Debian 13 · OSX-REIMS 0.4.0

  • First image: installer, first setup with hardware and driver detection, dedicated session with the OSX-REIMS console, and diagnostics.

Important

Always use the latest ISO published in the #vgpu-os channel. Earlier versions should not be installed.